april 2006 rev 1 1/7 7 order codes part number marking package packing 2N3773 2N3773 to-3 bag 2N3773 high power npn silicon transistor general features stmicroelectronics preferred salestype description the device is a silicon planar npn transistor mounted in jedec to-3 metal case. it is intended for linear amplifiers and inductive switching applications. internal schematic diagram to-3 1 2 www.st.com
electrical ratings 2N3773 2/7 1 electrical ratings table 2. thermal data table 1. absolute maximum ratings symbol parameter value unit v ceo collector-emitter voltage (i b = 0) 140 v v cev collector-emitter voltage (v be = -1.5v) 160 v v cbo collector-base voltage (i e = 0) 160 v v ebo emitter-base voltage (i c = 0) 7 v i c collector current 16 a i cm collector peak current (t p < 5ms) 30 a i b base current 4 a i bm base peak current (t p < 1ms) 15 a p tot total dissipation at t c 25c 150 w t stg storage temperature -65 to 200 c symbol parameter value unit r thj-case thermal resistance junction-case ____m__m max 1.17 c/w
2N3773 3/7 2 electrical characteristics (t case = 25c unless otherwise specified) table 3. electrical characteristics symbol parameter test conditions min. typ. max. unit i cev collector cut-off current (v be = -1.5v) v cb = 140v v cb = 140v t j = 150c 2 10 ma ma i ceo collector cut-off current (i b = 0) v cb = 120v 10 ma i cbo collector cut-off current (i e = 0) v cb = 140v 2ma i ebo emitter cut-off current (i c = 0) v cb = 7v 5ma v ceo(sus) (1) collector-emitter sustaining voltage (i b = 0) i c = 0.2a 140 v v cev(sus) (1) collector-emitter sustaining voltage (v eb = -1.5v) i c = 0.2a 160 v v cer(sus) (1) collector-emitter sustaining voltage (r be = 100 ? ) i c = 0.2a 150 v v ce(sat) (1) 1. pulsed: pulse duration = 300 s, duty cycle 2 % collector-emitter saturation voltage i c = 8a i b = 0.8a i c = 16a i b = 3.2a 1.4 4 v v v be (1) base-emitter voltage i c = 8a v ce = 4v 2.2 v h fe (1) dc current gain i c = 8a v ce = 4v i c = 16a v ce = 4v 15 5 60 i s/b second breakdown collector current v ce = 30v t = 1s (non repetitive) 5a
package mechanical data 2N3773 4/7 3 package mechanical data in order to meet environmental requirements, st offers these devices in ecopack? packages. these packages have a lead-free second level interconnect. the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com
2N3773 5/7 dim. mm inch min. typ. max. min. typ. max. a 11.00 13.10 0.433 0.516 b 0.97 1.15 0.038 0.045 c 1.50 1.65 0.059 0.065 d 8.32 8.92 0.327 0.351 e 19.00 20.00 0.748 0.787 g 10.70 11.10 0.421 0.437 n 16.50 17.20 0.649 0.677 p 25.00 26.00 0.984 1.023 r 4.00 4.09 0.157 0.161 u 38.50 39.30 1.515 1.547 v 30.00 30.30 1.187 1.193 e b r c d a p g n v u o p003f to-3 mechanical data
revision history 2N3773 6/7 4 revision history table 4. revision history date revision changes 03-apr-2006 1 initial release.
2N3773 7/7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at an y time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorize representative of st, st products are not designed, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems, where failure or malfunction may result in personal injury, death, or severe property or environmental damage. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, an y liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2006 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
